Administration of Veritas NetBackup 7.7 and Appliances 2.7

QUESTION NO: 1

Which scenario accurately describes the creation of a full synthetic backup using tape?

A. a single drive can be used for both the read and write of the backup

B. a separate read drive and write drive can be used on the same Media Server

C. a read and write drive can be used on different Media Servers

D. a disk storage unit must be used prior to copying the backup to tape

Answer:

QUESTION NO: 2

Refer to the exhibit.

An assigned backup tape contains four images, two of which are expired. A new backup is initiated.

How does NetBackup write the new image?

A. It appends new images to the last file marker on the tape

B. It writes new images to the space where the expired images once resided on the tape

C. It overwrites the expired data on the tape with the new images

D. It writes the new image to an alternate tape

Answer:

QUESTION NO: 3

Which two schedule types are allowed for the NBU-Catalog policy type? (Select two.)

A. Automatic Backup

B. Cumulative Incremental Backup

C. Session Backup

D. Differential Incremental Backup

E. Application Backup

Answer:

QUESTION NO: 4

Which operation compares the contents of an image to the NetBackup catalog?

A. Verify

B. Duplicate

C. Import

D. Rehydrate

Answer:

QUESTION NO: 5

Which Storage Unit Group option causes NetBackup to choose the least recently selected storage unit in the list as each new job is started?

A. Prioritized

B. Failover

C. Round Robin

D. Media Server Load Balancing

Answer:

QUESTION NO: 6

Which action is performed by the NetBackup deduplication plug-in?

A. writing data segments into the MSDP containers

B. processing MSDP transaction logs

C. performing file fingerprinting actions

D. performing queue processing

Answer:

QUESTION NO: 7

How frequently does content router queue processing (CRQP) run, by default?

A. every 6 hours

B. every 12 hours

C. every 24 hours

D. every week

Answer:

QUESTION NO: 8

The administrator of a large bank needs to preserve financial information for an extended period of time. The bank’s NetBackup 7.7 catalog is now over 800GB in size, causing the catalog backups to contend for resources with production system backups.

How can the administrator shorten the time needed to back up the catalog?

A. use the NetBackup 7.7 Agent for Symantec Enterprise Vault to perform an online archive of the catalog

B. create a catalog archive policy and execute it from the command line using the bpcatarc command

C. use the NetBackup 7.7 client-side deduplication feature to shorten the time it takes to perform a catalog backup.

D. back up the catalog by scheduling an online Sybase database backup policy to allow the backup to run without contending for resources

Answer:

QUESTION NO: 9

What should an administrator do to enable backups to span multiple BasicDisk storage units?

A. configure a storage unit group and add BasicDisk storage units from multiple Media Servers

B. configure a storage unit group that consists only of disk storage units defined on a single Media Server

C. confirm that a load balancing storage unit is selected at the group level

D. select Storage Units > Storage Unit > Allow backup to span disks

Answer:

QUESTION NO: 10

The Master Server catalog is being recovered to a new server. The administrator receives the message displayed below:

Please insert the following media and run the volume configuration wizard or the vmupdate command to update the NetBackup database.

Host – train1

MediaID – GBP847

Barcode – GBP847s1

In the Administration Console, barcode GBP847S1 is associated with media ID P847S1.

How should the administrator proceed?

A. use bplabel to change the media ID > re-inventory the library > perform recovery

B. use nbdelete to remove the media id > use vmadd to re-add the the media id > re-inventory the library > perform recovery

C. delete the tape > set the media ID generation rule accordingly > re-inventory the library > run recovery

D. delete the tape > set the barcode rule accordingly > re-inventory the library > run recovery

Answer:

QUESTION NO: 11

A Windows 2008 R2 64-bit client backup job hung. The NetBackup administrator cancelled the job in the Administration Console and restarted the NetBackup Client Service on the client. The administrator initiated another backup of the client, and it also hung.

Which NetBackup client process should be terminated to allow new backups to occur?

A. bpcd

B. bpbkar

C. bpbkar32

D. bpbkar64

Answer:

QUESTION NO: 12

Which parameter in NetBackup Management > Host Properties must be modified to change the logging level to 5 for client1.domain ?

A. Master Servers > [master_server_name] > Logging > Global logging level

B. Clients > [client_name] > Logging > Global logging level

C. Master Servers > [master_server_name] > Logging > Enable robust logging

D. Clients > [client_name] > Logging > Enable robust logging

Answer:

QUESTION NO: 13

An administrator has backups failing with status code 96 due to tapes being prevented from returning to the scratch volume pool after the images they contain expire.

What prevented the media from returning to the scratch pool?

A. media was created in volume pools other than the scratch pool

B. media was in an off-site location

C. media was written with multiplexed images

D. media was in a Suspended state

Answer:

QUESTION NO: 14

Backups to a storage device fail with the following error message:

Disk storage is down (2106)

The storage server is an OpenStorage (OST) host, and the Master Server and Media Server are both acting as Media Servers under Credentials > Storage Servers in the Administartion Console. The disk pool is in an Up state and the storage server is in a Down state. Troubleshooting confirmed the OST plug-ins on the servers are mismatched.

Which command should an administrator use to check the plug-in version installed on the servers?

A. bpgetconfig

B. nbemmcmd

C. nbdevquery

D. bpstsinfo

Answer:

QUESTION NO: 15

In which order should an administrator perform upgrades to a major release in a NetBackup environment?

A. Master Server, OpsCenter Server, Media Server, Clients

B. OpsCenter Server, Master Server, Media Server, Clients

C. Master Server, Media Server, OpsCenter Server, Clients

D. Master Server, Media Server, Clients, OpsCenter Server

Answer:

QUESTION NO: 16

An administrator is configuring a new MSDP pool on an appliance that contains:

4.5TB of internal storage

36TB external shelf 1

36TB external shelf 2

How should the administrator allocate storage to ensure maximum performance?

A. assign only one external shelf to the new MSDP pool

B. assign both external shelves to the new MSDP pool

C. assign all internal and external storage to the new MSDP pool

D. assign one external shelf to the new MSDP pool as storage, and one external shelf as catalog

Answer:

QUESTION NO: 17

Which information is validated during an image verification operation?

A. data on the master server is validated with data in the NetBackup catalog

B. data on the client is validated with data in the NetBackup catalog

C. data on the volume is validated with data in the NetBackup catalog

D. data on the client and the volume is validated with data in the NetBackup catalog

Answer:

QUESTION NO: 18

An administrator needs to store secure tape copies of protected data to an offsite location.

How can the administrator automatically eject tape media daily and create detailed reports?

A. encrypt the tapes using software encryption and use a storage lifecycle policy to perform automatic ejects and create reports

B. enable the encryption attribute on the vault policy to perform automated ejects and create reports

C. use tape drives that support hardware encryption and use a vault policy to perform automated ejects and create reports

D. use tape drives that support hardware encryption and use a storage lifecycle policy to perform automated ejects and create reports

Answer:

QUESTION NO: 19

Refer to the exhibit.

What is the outcome of the policy shown in the exhibit?

A. the client encrypts then compresses the data before sending it to the Media Server

B. the client compresses and the Media Server encrypts the data before sending it to the tape drive

C. the client compresses then encrypts the data before sending it to the Media Server

D. the client sends the data to the Media Server, which compresses and then encrypts the data

Answer:

QUESTION NO: 20

Which command can be used to recover the NBDB from the staging location?

A. bprecover

B. bprestore

C. nbdb_restore

D. nbdb_load

Answer:

QUESTION NO: 21

Which policy directive(s) should an administrator place in the Backup Selections tab to ensure the system is protected when backing up a Windows server?

A. ALL_LOCAL_DRIVES and System State:\

B. ALL_LOCAL_DRIVES and Shadow Copy Components:\

C. ALL_LOCAL_DRIVES

D. ALL_LOCAL_DRIVES and System State:\ and Shadow Copy Components:\

Answer:

QUESTION NO: 22

What are two possible causes for job failure when a Windows policy is configured to use Accelerator? (Select two.)

A. client-side deduplication is disabled

B. use of the NTFS Change Journal is disabled

C. the backup target is AdvancedDisk

D. insufficient space in the NetBackup installation directory

C. the policy lacks a forced rescan schedule

Answer:

QUESTION NO: 23

The following storage lifecycle policy was used to back up data from a client.

Storage Lifecycle Policy

Backup to AdvancedDisk

Duplication to tape

Duplication to AdvancedDisk

How should an administrator restore data from the tape using NetBackup?

A. From the BAR GUI, select the tape backup to restore from

B. use bpduplicate command to promote copy 1 to the primary copy

C. from the NetBackup Administration console, promote copy 1 to the primary copy

D. from the NetBackup Administration console, promote copy 2 to the primary copy

Answer:

QUESTION NO: 24

An administrator tries to suspend an active job from the NetBackup Activity Monitor, but discovers that the option is grayed out.

What is preventing the administrator from suspending the job?

A. child jobs are still active

B. the parent job is still active

C. Mutiplexing is enabled

D. Checkpoint restart is disabled

Answer:

QUESTION NO: 25

An administrator needs to decrease the total amount of time required to back up a UNIX file server, but requires a full backup every night for recovery purposes.

How should the administrator proceed?

A. use compression

B. use Accelerator

C. use change journal

D. use client-side deduplication

Answer:

QUESTION NO: 26

An administrator needs to duplicate a backup that completed successfully earlier that same day.

How can this be accomplished?

A. locate the original backup from NetBackup Management > Reports > Images on Media, right click and select duplicate

B. locate the policy for the original backup and initiate a manual backup

C. locate the policy for the original backup and enable Multiple Copies on the on the appropriate schedule

D. locate the original backup from NetBackup Management > Catalog, right click and select duplicate

Answer:

QUESTION NO: 27

Which status code applies only to disk storage units?

A. 129

B. 86

C. 219

D. 2805

Answer:

QUESTION NO: 28

Which NetBackup command is used to report the potential free space of AdvancedDisk storage units?

A. nbdevquery

B. bpstuinfo

C. nbemmcmd

D. bpstinfo

Answer:

QUESTION NO: 29

An administrator runs the following command on the Master Server to r=teat connectivity to a client:

bptestbpcd –client clientA

The administrator receives the following message:

<16> bptestbpcd main: Function ConnectToBPCD (clientA) failed: 25 cannot connect on socket

Which two reasons may cause the error message? (Select two.)

A. an incorrect entry for the Master Server in the client’s hosts file

B. the NeBackup processes on the client are stopped

C. The Master Server is unknown to the client

D. an incorrect entry for the client in the Master Server’s hosts file

E. vnetd is stopped on the Master Server

Answer:

QUESTION NO: 30

Which bonding mode requires configuration on the network switch?

A. 802.3ad

B. active-backup

C. balance-alb

D. balance-rr

Answer:

QUESTION NO: 31

Which two actions should an administrator take to allow NetBackup to manage the allocation of volumes to volume pools? (Select two.)

A. define a scratch pool and add all of the volumes to it so NetBackup will move volumes to the other pools as volumes are needed

B. assign volumes to all volume pools as required in the environment

C. define a scratch pool with assigned volumes so NetBackup will move the assigned volumes to other pools as volumes are needed

D. create volume pools as required, but refrain from adding volumes to the pools

E. assign volumes to NetBackup and DataStore volume pools so NetBackup will move the assigned volumes to other pools as volumes are needed

Answer:

QUESTION NO: 32

Which interface is pre-configured with the 192.168.229.233 IP address?

A. lo

B. eth0

C. eth1

D. IPMI

Answer:

QUESTION NO: 33

An MSDP Media Server is experiencing performance issues when running multiple deduplication backup jobs concurrently over 10 GbE. When switched to AdvancedDisk on the same Media Server, the backups perform well.

Which step can be utilized to migrate the performance issues?

A. increase the Maximum concurrent jobs for the MSDP storage unit

B. increase the size of the MSDP disk pool on the Storage Server

C. add load balancing Media Servers for the Storage Server

D. increase the Job priority on the MSDP backup policy

Answer:

QUESTION NO: 34

On which system(s) is the NetBackup 7.7 LiveUpdate agent installed by default?

A. Master Server only

B. Master Server and Media Server only

C. Master Server, Media Server, and client

D. Media Server and client only

Answer:

QUESTION NO: 35

In which two places can an administrator view the available space for a Media Server Deduplication Pool? (Select two.)

A. Reports > Disk Reports > Images on Disk

B. Device Monitor > Disk Pools

C. Reports > Disk Reports > Disk Logs

D. Devices > Disk Pools

E. Reports > Disk Reports > Disk Pool Status

Answer:

QUESTION NO: 36

Which command should an administrator use to determine which storage lifecycle policy’s image copies are incomplete?

A. nbst1

B. nbreplicate

C. bpimage

D. nbstlutil

Answer:

QUESTION NO: 37

Which schedule can be configured as a synthetic backup in addition to the full backup schedule type?

A. differential incremental backup

B. cumulative incremental backup

D. user backup

E. application backup

F. automatic backup

Answer:

QUESTION NO: 38

Which command should an administrator use to check the number of images that need to complete the storage lifecycle secondary processing?

A. bpimage

B. nbstlutil

C. nbst1

D. nbreplicate

Answer:

QUESTION NO: 39

Which utility should an administrator use to verify library device functionality?

A. nbdevconfig

B. robtest

C. bpmedia

D. tpconfig

Answer:

QUESTION NO: 40

Which statement applies to a NetBackup calendar based schedule in a Windows policy type?

A. the backup may run on a day with a closed backup window with Retries allowed after runday

B. an Exclude date may be configured to occur on an included recurring day of the week

C. configuring a start window spanning midnight is invalid

D. a calendar based schedule can run twice a day

Answer:

Site Search:

Close

Close
Download Free Demo of VCE
Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.


Simply submit your e-mail address below to get started with our interactive software demo of your free trial.


Enter Your Email Address

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.